Grass Valley iMC-Panel-100 v.7.2.9.0 User Manual
Page 153
141
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
This is the ‘Program Input Audio’ menu:
The ‘Preset Input Audio’ menu is just like the ‘Program Input Audio’ menu.
The control at the bottom of the screen adjusts the master audio level. The 16 individual audio
channels are affected by the main level.
To adjust this parameter, click or touch the knob proxy associated with the green asterisk in the
control box. Then either click or touch the keypad icon to access a large keypad with which to
enter a number, use the slider, or use the scroll/set knob to adjust the level. (The scroll/set knob
does not become enabled until you click or touch the knob proxy.)
The ‘Main Menu’ button returns you to the main menu. The ‘Set All Levels to Unity’ button sets
all 16 audio channels to unity gain. The other 3 buttons in the upper row access other sub-
menus.
The ‘Restore...’ buttons restore your audio settings (shuffle or gain) to what was in the Imag-
estore 750’s configuration. The ‘Save All’ button saves your current audio settings
—
for the
currently selected main source
—
to the Imagestore 750. (These buttons are not present in the
‘Program Output Audio’ menu or the voice-over menus.)