Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 83)

71
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
DSK Menus
Figure 5-13 shows the panel’s ‘DSK 1 Browser’ menu:
Fig. 5-13: DSK 1 Menu
The DSK 2, DSK 3, and DSK 4 browser menus are just like the DSK 1 browser menu.
S The LGK-3901 and ISM-3901 support 5 DSKs. For these units, the panel has 5 DSK menus. The
DSK-3901 has only 2 DSKs. For this unit, the panel has only 2 DSK menus.
The DSK browser menus let you select a DSK (downstream key) and specify display parameters
for it.
Touch a DSK thumbnail to select the DSK. Use the scroll bar to view additional thumbnails. The
outer arrows of the scrollbar scroll the list to its top or bottom. The inner arrows scroll the list of
DSKs by one line up or down. The ‘Show Selection’ button causes the list to scroll so that the
currently selected DSK appears in the window. This can be important if you have very many
DSKs from which to choose.
The parameters controlled by the options buttons apply to the most recently selected DSK.
Press the red ‘Load Disabled’ button to enable selection of clips using thumbnails. The button
turns green and reads ‘Load Enabled’ when clip selection is enabled. Disabling loads prevents
accidental select of a clip. Press ‘Load Enabled’ again to re-disable selection of clips.
Press the ‘Clear DSK’ button unselect the currently selected DSK. The result is no selection.
Press the ‘Main Menu’ button to return to the main menu.
XG layers are handled by one of the DSKs. The relationship between XG layers and a DSK is not
simple. See
Working with XG Layers on page 128 for information.
Options
Buttons
List
Buttons
Scroll
Bar
DSK
Thumb-