Rates, cgt, keying – Grass Valley iMC-Panel-100 v.7.2.9.0 User Manual
Page 136
124
Operation
Working with DSKs
Rates, CGT, Keying
Press ‘Rates CGT Keying’ to access a menu in which to change the DSK rate, the clip, gain, trans-
parency parameters, or key options. The ‘DSK Rates, CGT, Keying’ sub-menu appears:
Fig. 6-1: DSK Rates, CGT, Keying Settings (Sample)
This menu controls three things:
•
DSK rates (slow, medium, and fast).
•
Key parameters (clip, gain, and transparency).
•
Key options (source, mode, and sense).
Clip, Gain, Transparency
Press the ‘Adjust CGT’ button to change the DSK’s clip, gain, and transparency values. The menu
will show a control at the bottom for each parameter (as shown in Figure 6-1 above):
Use the keypad icon or the knob proxy below the parameter’s green asterisk to change the
value.
DSK Rates
Press the ‘Adjust Rates’ button to change the DSK’s slow, medium, and fast rates. The menu will
show a control at the bottom for each rate:
Use the keypad icon or the knob proxy below the parameter’s green asterisk to change the
value.