Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 166)

154
Operation
Fade to Black
Press the ‘Hold’ button to freeze the time values. Doing this might help you synchronize with
another clock. Release the hold at the moment you want the clock to start again.
Press ‘Cancel’ to discard your changes and return to the ‘Panel Info’ menu.
Press ‘Done’ to save your changes and return to the ‘Panel Info’ menu.
Fade to Black
A ‘Fade to Black’ button is a toggle: press it once to fade program video to black. Press the
button again to fade up from black to normal program output.
The FTB and FTS rates are pre-configured in the Imagestore 750. You cannot change them.
S When the Imagestore 750 has faded to black/silence, the FTB and FTS buttons of the main
menu are highlighted in red.
Fade to Silence
A ‘Fade to Silence’ button is a toggle: press it once to fade program audio to silence. Press the
button again to fade up from silence to normal program output.
The FTS rate is pre-configured in the Imagestore 750. You cannot change it.
S When the Imagestore 750 has faded to silence, the FTS button of the main menu is high-
lighted in red.
Updating Configuration Settings
You (or your system administrator) can create new iMC-Panel-100 configurations and then
update the iMC-Panel-100 accordingly. The configuration software is the MCS Panel Configura-
tion Editor.
Refer to the MCS Panel Configuration Editor User’s Guide for configuration instructions.