Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 38)

26
Control Panel
Functional Sections of the Panel
11 Bottom row buttons
The buttons in this section are all configurable. (See Definable Button Functions , on
page 37.)
‘Scroll/Set’ knob
When you touch (or click) the knob proxy (under the menu) associated with some parameter
(such as voice-over level), the slider appears on the display and the ‘Scroll/Set’ knob of the
button panel becomes enabled. You can use either the ‘Scroll/Set’ knob or the slider to
adjust the parameter.
12 Audio monitoring knobs
The panel has two rotary knobs in this section, labeled:
• Monitor A
• Monitor B
The knobs apply when the panel is controlling an MCE or an MCPM. The knobs do not apply
to Imagestore 750s.
13 Transition button
The transition button displays the transition type (as a graphic) and the transition rate (in
text).
‘Cut’ transitions involve no rate and for cut transitions, the button displays no rate text.
The button is bright orange.
Pressing the transition button initiates a transition in the Imagestore 750 according to the
iMC-Panel-100 setup.
See Transition Button on page 36 for detail.
Top Row Buttons
Figure 3-5 shows the top row of buttons:
Fig. 3-4: Menu Area (Sample Showing Knob Proxies)
The 8 large buttons in this row are all configurable buttons. However, the row is designed to
accommodate channel selection buttons that have thumbnail images representing the
channels.