Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 52)

40
Control Panel
Definable Button Functions
When the program output is silent, fading to it, or fading up from it, the FTS button of the main
menu is red.
Fades occur at the FTS rate defined in the Imagestore 750 configuration. The FTS rate is fixed in
the Imagestore 750 configuration.
These are the button colors:
• High-tally green. The program output is fading or has faded.
• Low-tally green. The program output is normal.
Group Select
The Imagestore 750 allows different source groups to be defined, where the sources in a group
can be mapped to the main source buttons of the panel.
A ‘Group Select’ button selects a source group. When the group is selected, its source
mnemonics appear on the main source buttons and (if your system is so configured) the sources
in the group appear on monitors in a monitor wall.
When you hold the button down, an automated transition is suspended. When you release the
button, the transition continues. This is special-purpose button that lets you synchronize a tran-
sition with a video feed that might be delayed unpredictably.
The button is low-tally green normally and high-tally amber when you press it.
Audio Lock
An ‘Audio Lock’ button is a toggle that enables or disables the 3 audio level knobs on the iMC-
Panel-100. (This feature helps prevent accidental changes to the audio levels)
The button is amber when the audio level knobs are locked.
Macro Arm
A ‘Macro Arm’ button selects an Imagestore 750 macro that will execute at the next transition.
S Certain macros can contain functions that must not execute during a transition. Such
macros will execute immediately after the transition completes.
Fire Macro
A ‘Fire Macro’ button executes an Imagestore 750 macro immediately.
PGM DVE Enable
A ‘PGM DVE Enable’ button enables or disables the use of DVE buttons on the program button
row.
PST DVE Enable
A ‘PST DVE Enable’ button enables or disables the use of DVE buttons on the preset button row.
KaleidoX Layout
A ‘Kaleido-X Layout’ button triggers a re-layout of a Kaleido-X multi-viewer. (The panel will prob-
ably not have any ‘Kaleido-X Layout’ buttons if your master control system is not associated with
a Kaleido-X multi-viewer. The Kaleido-X multi-viewer supports multiple layouts.)