Grass Valley iMC-Panel-100 v.7.2.9.0 - Manual (Page 39)

27
iMC-Panel-100
Operator’s Guide (for Imagestore 750s)
Menu Area
Figure 3-5 shows the menu area and its 8 associated “knobs”:
Fig. 3-5: Menu Area (Sample Showing Knob Proxies)
The menu area presents a number of different menus that allow you to perform source selec-
tions and adjust operating parameters.
Menu buttons allow you to select the menu that appears in the menu area. Menu buttons are
toggles: pressing the button once displays the menu; pressing the button again displays the
main menu.
Some menus allow you to adjust function parameters, such as the ‘DSK Rates, CGT, and Keying’
menu shown in Figure 3-5. You can adjust function parameters in two ways:
• Using the adjacent knob proxies.
Touch (or click) the knob proxy. Use the slider that appears or the ‘Scroll/Set’ knob that
becomes enabled to adjust the parameter.
• Pressing the keypad image within the menu itself.
Use the on-screen keypad that appears to adjust numeric values.
Some menus have a scrollbar with which to select items. You can use the menu knobs (and the
slider) to “dial in” a parameter value or you can enter a value using a keypad menu.
The menu area has a region at the top for status and error messages and another region at the
top for informative messages.
Refer to Chapter 5, Menus , on page 55 for a comprehensive review of all menus.