H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 81)

71
Configuring the flow interval
With the flow interval module, you can view the number of packets and bytes sent and received by a port,
and the bandwidth use of the port over the specified interval.
Setting the traffic statistics generating interval
1. From the navigation tree, select Device > Flow interval.
2. Click the Interval Configuration tab.
Figure 64 Setting the traffic statistics generating interval
3. Set the traffic statistics generating interval, as described in Table 19 .
4. Click Apply.
Table 19 Configuration items
Item Remarks
Interval for generating traffic statistics Set the interval for generating port traffic statistics.
Select ports
Select ports from the chassis front panel to apply the
interval to them.
Viewing port traffic statistics
1. From the navigation tree, select Device > Flow interval.
The Port Traffic Statistics tab appears.
2. View the number of packets and bytes sent and received by each port, and the bandwidth use of
each port over the last interval.