H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 19)

9
• Visitor—Users can use the network diagnostic tools ping and Trace Route, but they can neither
access the device data nor configure the device.
• Monitor—Users can only access the device data, but they cannot configure the device.
• Configure—Users can access device data and configure the device, but they cannot upgrade the
host software, add/delete/modify users, or backup/restore configuration files.
• Management—Users of this level can perform any operations to the device.
Web-based NM functions
A user level in Table 3 indicates that users of this level or users of a higher level can perform the
corresponding operations.
Table 3 Web-based NM function description
Function menu Description User level
Wizard IP Setup Perform quick configuration of the device. Management
Summary
System Information
Display the system information, system
resource status, and the recent system
operation logs.
Monitor
Device Information
Display the port, power supply, and fan
information of the device.
Monitor
Device
Basic
System Name Display and configure the system name. Configure
Web Idle Timeout
Display and configure the idle timeout
period for logged-in users.
Configure
System
Time
System Time
Display the system date and time. Monitor
Configure the system date and time Configure
Time Zone
Display configurations about system time
zone and daylight saving time.
Monitor
Configure system time zone and daylight
saving time.
Configure
Network Time
Protocol
Display the synchronization status of
system clock and network time
configuration information.
Monitor
Configure the network time. Configure
Device
Maintena
nce
Software Upgrade
Configure to upload upgrade file from
local host, and upgrade the system
software.
Management
Reboot Configure to reboot the device. Management
Diagnostic
Information Generate diagnostic information file, and
view or save the file to local host.
Management
Syslog
Loglist
Display and refreshes system logs. Monitor
Clear system logs. Configure
Loghost Display and configure the loghost. Configure