H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 73)

63
Figure 56 Configuring the mirroring ports
3. Configure the monitor port as GigabitEthernet 1/0/3:
a. Click the Modify Port tab to enter the page.
b. From the Mirroring Group ID list, select 1 – Local.
c. From the Port Type list, select Monitor Port.
d. On the chassis front panel, select 3 (GigabitEthernet 1/0/3).
e. Click Apply.
A configuration progress dialog box appears.
f. After the success notification appears, click Close.