H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 48)

38
Managing logs
System logs record network and device information, including running status and configuration changes.
With system logs, administrators can take corresponding actions against network problems and security
problems.
The system sends system logs to the following destinations:
• Console
• Monitor terminal, a terminal that has logged in to the device through the AUX or VTY user interface
• Log buffer
• Log host
• Web interface
Displaying syslogs
1. From the navigation tree, select Device > Syslog.
The page for displaying syslogs appears. You can perform the following tasks:
{
Click Reset to clear all system logs saved in the log buffer on the Web interface.
{
Click Refresh to manually refresh the page.
{
Set the refresh interval on the Log Setup page to enable the system to automatically refresh the
page periodically.
For more information, see " Setting buffer capacity and refresh interval ."
Figure 36 Displaying syslogs