H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 13
3
Figure 3 Management IP address configuration page
2.
Configure the parameters as described in
.
Table 2 Configuration items
Item Description
Select VLAN
Interface
Select a VLAN interface.
Available VLAN interfaces are those configured in the page that you enter by selecting
Network > VLAN Interface and selecting the Create tab.
The IP address of a VLAN interface can be used as the management IP address to access
the device. Configure a VLAN interface and its IP address in the page that you enter by
selecting Network > VLAN Interface. For more information, see "Configuring VLAN
Admin status
Enable or disable the VLAN interface.
When errors occurred in the VLAN interface, disable the interface and then enable the
port to bring the port to operate properly.
By default, the VLAN interface is down if no Ethernet ports in the VLAN is up. The VLAN
is in the up state if one or more ports in the VLAN are up.
IMPORTANT:
Disabling or enabling the VLAN interface does not affect the status of the Ethernet ports in
the VLAN. That is, the port status does not change with the VLAN interface status.