H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 133
123
Step Remarks
3. Setting the PVID for a port
.
Configure the PVID of
the trunk port.
Required.
A trunk port has only one
untagged VLAN and the
untagged VLAN is its PVID.
The three operations
produce the same result,
and the latest operation
takes effect.
By default, the untagged
VLAN of a trunk port is
VLAN 1.
When you change the
untagged VLAN (PVID) of a
trunk port, the former
untagged VLAN
automatically becomes a
tagged VLAN of the trunk
port.
4.
Configure the trunk port as an untagged member
of the specified VLANs:
Specify the range of VLANs available for
selection during related operations.
Configure a subset of all existing VLANs. This
step is required before you perform
operations on the Detail, Modify VLAN, and
Modify Port tabs.
Configure the trunk port as an untagged
member of the specified VLANs.
N/A
Configure the
untagged VLAN of the
trunk port.
6.
Configure the trunk port as a tagged member of
the specified VLANs:
Specify the range of VLANs available for
selection during related operations.
Configure a subset of all existing VLANs. This
step is required before you perform
operations on the Detail, Modify VLAN, and
Modify Port tabs.
Configure the trunk port as a tagged member
of the specified VLANs.
N/A
Required.
A trunk port can have
multiple tagged VLANs.
You can repeat these steps
to configure multiple
tagged VLANs for the trunk
port.
Configure the tagged
VLAN of the trunk port.
Recommended configuration procedure for assigning a hybrid
port to a VLAN
Step Remarks
Required.
Create one or multiple VLANs.
2. Configuring the link type of a port
Optional.
Configure the link type of the port as hybrid.
To configure a trunk port as a hybrid port, first
configure it as an access port.
If you configure multiple untagged VLANs for a trunk
port at the same time, the trunk port automatically
becomes a hybrid port.
By default, the link type of a port is access.