H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 44)

34
Figure 30 Calendar page
3. Either enter the system date and time in the field, or select the date and time in the calendar, where
you can do one of the following:
{
Click Today. The date setting in the calendar is synchronized to the current local date
configuration, and the time setting does not change.
{
Select the year, month, date, and time, and then click OK.
4. Click Apply on the system time configuration page to save your configuration.
Configuring network time
1. From the navigation tree, select Device > System Time.
2. Click the Network Time Protocol tab.
The network time configuration page appears.
Figure 31 Network time configuration page
3. Configure the network time, as described in Table 9 .
4. Click Apply.