H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 111)

101
Figure 96 Creating an SNMP Community
4. Configure the SNMP community, as described in Table 36 .
5. Click Apply.
Table 36 Configuration items
Item Description
Community Name Set the SNMP community name.
Access Right
Configure SNMP NMS access right:
• Read only—The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent.
• Read and write—The NMS can perform both read and write operations to the
MIB objects when it uses this community name to access the agent.
View
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the access to the
agent from the NMS with the specified source IP address.
Configuring an SNMP group
1. From the navigation tree, select Device > SNMP.
2. Click the Group tab.
The Group tab appears.
Figure 97 SNMP group