H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 56)

46
Uploading a file
IMPORTANT:
Uploading a file takes some time. H3C recommends that you not perform any operation on the Web
interface during the upload.
1. From the navigation tree, select Device > File Management.
The file management page appears, as shown in
Figure 43 .
2. In the Upload File area, select the medium for saving the file from the Please select disk list.
3. Click Browse to navigate to the file to be uploaded.
4. Click Apply.
Removing a file
1. From the navigation tree, select Device > File Management.
2. The file management page appears, as shown in Figure 43 .
3. Perform one of the following tasks:
{
Click the icon of a file to remove the file.
{
Select a file from the file list and click Remove File.
To remove multiple files, repeat step 2, or select the files from the file list and click Remove File.
Specifying the main boot file
1. From the navigation tree, select Device > File Manage.
2. The file management page appears, as shown in Figure 43 .
3. From the Please select disk list, select the medium that holds the application file to be used as the
main boot file.
4. From the file list, select the application file (with the extension .bin or .app).
5. Click Set as Main Boot File.