H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 12)

2
Figure 2 System parameter configuration page
2. Configure the parameters as described in Table 1 .
Table 1 Configuration items
Item Description
Sysname
Specify the system name.
The system name appears at the top of the navigation tree.
You can also set the system name in the System Name page you enter by selecting
Device > Basic. For more information, see "Configuring basic device settings."
Syslocation
Specify the physical location of the system.
You can also set the physical location in the setup page you enter by selecting Device >
SNMP. For more information, see "Configuring SNMP."
Syscontact
Set the contact information for users to get in touch with the device vendor for help.
You can also set the contact information in the setup page you enter by selecting
Device > SNMP. For more information, see "Configuring SNMP."
Configuring management IP address
CAUTION:
Modifying the management IP address used for the current login terminates the connection to the device.
Use the new management IP address to re-log in to the system.
1. On the system parameter configuration page, click Next.