beautypg.com

Method 2: create dynamic link aggregation group 1 – H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 211

background image

201

Figure 183 Creating static link aggregation group 1

Method 2: Create dynamic link aggregation group 1

1.

Select Network > Link Aggregation from the navigation tree.

2.

Click Create.

3.

Configure dynamic aggregation group 1:

a.

Enter link aggregation interface ID 1.

b.

Select the Dynamic (LACP Enabled) option for aggregate interface type.

c.

Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.

4.

Click Apply.

See also other documents in the category H3C Technologies Routers: