H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 122)

112
f. Click Apply.
A configuration progress dialog box appears.
g. Click Close after the configuration process is complete.
Figure 113 Creating an SNMP view (2)
3. Configure an SNMP group:
a. Click the Group tab.
b. Click Add.
The page in
Figure 114 appears.
c. Enter group1 in the Group Name field, select view1 from the Read View list, select view1 from
the Write View list.
d. Click Apply.
Figure 114 Creating an SNMP group
4. Configure an SNMP user:
a. Click the User tab.
b. Click Add.