Setting the aging time of mac address entries – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 171
161
Item Description
Type
Set the type of the MAC address entry:
•
Static—Static MAC address entries that never age out.
•
Dynamic—Dynamic MAC address entries that will age out.
•
Blackhole—Blackhole MAC address entries that never age out.
The tab displays the following types of MAC address entries:
•
Config static—Static MAC address entries manually configured by the users.
•
Config dynamic—Dynamic MAC address entries manually configured by the
users.
•
Blackhole—Blackhole MAC address entries.
•
Learned—Dynamic MAC address entries learned by the device.
•
Other—Other types of MAC address entries.
VLAN ID
Set the ID of the VLAN to which the MAC address belongs.
Port
Set the port to which the MAC address belongs. This port must belong to the specified
VLAN.
Setting the aging time of MAC address entries
1.
Select Network > MAC from the navigation tree.
2.
Click the Setup tab to enter the page for setting the MAC address entry aging time.
Figure 161 Setting the aging time for MAC address entries
3.
Configure the aging time for MAC address entries.
4.
Click Apply.
Table 54 Configuration items
Item Description
No-aging
Specify that the MAC address entry never ages out.
Aging time
Set the aging time for the MAC address entry.