beautypg.com

H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 242

background image

232

Figure 209 Configuring the voice VLAN function on ports

4.

Enable LLDP on ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2.
Skip this step if LLDP is enabled (the default).

5.

Set both the LLDP operating mode and the CDP operating mode to TxRx on ports GigabitEthernet
1/0/1 and GigabitEthernet 1/0/2:

a.

Select Network > LLDP from the navigation tree.
By default, the Port Setup tab is displayed.

See also other documents in the category H3C Technologies Routers: