H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 248)

238
Item Description
Port Number.
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button
in front of HTTP.
IMPORTANT:
When you modify a port, make sure the port is not used by any other
service.
ACL.
Associate the HTTP service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button
in front of HTTP.
HTTPS
Enable HTTPS service.
Enable or disable the HTTPS service.
The HTTPS service is disabled by default.
Certificate.
Select a local certificate for the HTTPS service from the Certificate
dropdown list.
You can configure the certificates available in the dropdown list in
Authentication > Certificate Management. For more information, see
"Managing certificates."
IMPORTANT:
If no certificate is specified, the HTTPS service generates its own
certificate.
Port Number.
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button
in front of HTTPS.
IMPORTANT:
When you modify a port, make sure the port is not used by any other
service.
ACL.
Associate the HTTPS service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button
in front of HTTPS.