H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 239)

229
Figure 205 The status information tab displaying the updated port status information
CDP-compatible LLDP configuration example
Network requirements
As shown in Figure 206 , on Switch A, configure VLAN 2 as a voice VLAN and configure
CDP-compatible LLDP to enable the Cisco IP phones to automatically configure the voice VLAN,
confining their voice traffic within the voice VLAN to be separate from other types of traffic.
Figure 206 Network diagram
Configuring Switch A
1. Create VLAN 2:
a. Select Network > VLAN from the navigation tree.
b. Click Create to enter the page for creating VLANs.
c. Enter 2 in the VLAN IDs field.
d. Click Create.