H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 224)

214
2. Select one or multiple ports on the port list.
3. Click Modify Selected to enter the page for modifying these ports in batch.
Figure 190 Modifying LLDP settings on ports in batch
4. Set the LLDP settings for these ports as described in Table 78 .
5. Click Apply.
A progress dialog box appears.
6. Click Close on the progress dialog box when the progress dialog box prompts that the
configuration succeeds.
Configuring global LLDP setup
1. Select Network > LLDP from the navigation tree.
2. Click the Global Setup tab.