H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 187)

177
Figure 168 MST region
2. Click Modify to enter the page for configuring MST regions.
Figure 169 Configuring an MST region
3. Configure the MST region information as described in Table 61 , and click Apply.
4. Click Activate.
Table 61 Configuration items
Item Description
Region Name
MST region name.
The MST region name is the bridge MAC address of the device by default.
Revision Level Revision level of the MST region.
Manual (Instance ID and VLAN
ID) Manually add VLAN-to-MSTI mappings. Click Apply to add the
VLAN-to-MSTI mapping entries to the list.
Modulo
The device automatically maps 4094 VLANs to the corresponding MSTIs
based on the modulo value.