H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 17)

7
Accessing the controller engine from the switching
engine's Web interface
IMPORTANT:
Toggle between the Web interfaces of the switching engine and the controller engine only if necessary.
Frequent toggling can cause TCP connections to exceed the upper limit. If the connections exceed the
upper limit, wait for several minutes (the Web idle timeout), and then log in to the Web interface again.
Alternatively, execute the free web-users all command in user view at the CLI to log off all Web users.
For information about how to configure the controller engine of the H3C WX5540E access controller,
see H3C WX5540E Access Controller Switching Engine Configuration Guides and H3C WX5540E
Access Controller Switching Engine Command References.
To log in to the controller engine from the switching engine, click Wlan Engine on the Web interface of
the switching engine, and then enter the login settings.
Figure 5 Accessing the controller engine from the switching engine
Figure 6 Logging in to the controller engine