H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 26)

16
Figure 10 Advanced search
Take the ARP table shown in Figure 8 as an example. If you want to search for the ARP entries with
interface being GigabitEthernet1/0/19, and IP address range being 192.168.1.50 to 192.168.1.59,
follow these steps:
1. Click the Advanced Search link, specify the search criteria on the advanced search page as shown
in Figure 11 , and click Apply. The ARP entries with interface being GigabitEthernet1/0/19 are
displayed.
Figure 11 Advanced search function example (1)
2. Click the Advanced Search link, specify the search criteria on the advanced search page as shown
in Figure 12 , and click Apply. The ARP entries with interface being GigabitEthernet1/0/19 and
IP address range being 192.168.1.50 to 192.168.1.59 are displayed as shown in Figure 13 .