H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 123)

113
The page in Figure 115 appears.
c. Enter user1 in the User Name field, select Auth/Priv from the Security Level list, select group1
from the Group Name list, select MD5 from the Authentication Mode list, enter authkey in the
Authentication Password and Confirm Authentication Password fields, select DES56 from the
Privacy Mode list, and enter prikey in the Privacy Password and Confirm Privacy Password
fields.
d. Click Apply.
Figure 115 Creating an SNMP user
5. Enable SNMP traps:
a. Click the Trap tab.
The Trap tab page appears.
Figure 116 Enabling SNMP traps