H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 250)

240
The ping configuration page appears.
Figure 214 Ping configuration page
2. Enter the IP address or the host name of the destination device in the Destination IP address or host
name field.
3. Click Start.
4. View the result in the Summary area.
Figure 215 Ping operation result
Traceroute operation
Before performing a traceroute operation, execute the ip ttl-expires enable command on intermediate
devices to enable the sending of ICMP timeout packets and execute the ip unreachables enable
command on the destination device to enable the sending of ICMP destination unreachable packets.
To perform a traceroute operation: