H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 41)

31
Item Description
File Type
Type of the boot file for the next boot:
• Main—Boots the device.
• Backup—Boots the device when the main boot file is unavailable.
If a file with the same
name already exists,
overwrite it without any
prompt
Specify whether to overwrite the file with the same name.
If you do not select the option, when a file with the same name exists, a dialog box
appears, telling you that the file already exists and you cannot continue the
upgrade.
To upgrade files of slave
boards at one time
The device does not support this option.
Reboot after the
upgrade finished Specify whether to reboot the device to make the upgraded software take effect
after the application file is uploaded.
Rebooting the device
CAUTION:
Before rebooting the device, save the configuration. Otherwise, all unsaved configuration will be lost after
device reboot.
1. From the navigation tree, select Device > Device Maintenance.
2. Click the Reboot tab.
Figure 26 Device reboot page
3. Clear the box before "Check whether the current configuration is saved in the next startup
configuration file" or keep it selected.
4. Click Apply.
A confirmation dialog box appears.
5. Click OK.
{
If you select Check whether the current configuration is saved in the next startup configuration
file, the system will check the configuration before rebooting the device. If the check succeeds,
the system reboots the device. If the check fails, a dialog box appears, telling you that the
current configuration and the saved configuration are inconsistent, and the device is not
rebooted. In this case, save the current configuration manually before you can reboot the
device.