H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 72)

62
Figure 55 Adding a local mirroring group
2. Configure the mirroring ports as GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2:
a. Click the Modify Port tab to enter the page.
b. From the Mirroring Group ID list, select 1 – Local.
c. From the Port Type list, select Mirror Port.
d. From the Stream Orientation list, select both.
e. On the chassis front panel, select 1 (GigabitEthernet 1/0/1) and 2 (GigabitEthernet 1/0/2),
f. Click Apply.
A configuration progress dialog box appears.
g. After the success notification appears, click Close.