beautypg.com

Managing ports, Setting operation parameters for a port – H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 57

background image

47

Managing ports

You can use the port management feature to set and view the operation parameters of a Layer 2 Ethernet

port and an aggregate interface.

•

For a Layer 2 Ethernet port, these operation parameters include its state, rate, duplex mode, link
type, PVID, description, MDI mode, flow control settings, MAC learning limit, and storm

suppression ratios.

•

For an aggregate interface, these operation parameters include its state and MAC learning limit.

Setting operation parameters for a port

1.

From the navigation tree, select Device > Port Management.

2.

Click the Setup tab.

Figure 44 The Setup tab

See also other documents in the category H3C Technologies Routers: