H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 70)

60
Configuring ports for a mirroring group
1. From the navigation tree, select Device > Port Mirroring.
2. Click the Modify Port tab.
The page for configuring ports for a mirroring group appears.
Figure 53 The Modify Port tab
3. Configure ports for the mirroring group, as described in Table 16 .
4. Click Apply.
A progress dialog box appears.
5. After the success notification appears, click Close.
Table 16 Configuration items
Item Description
Mirroring
Group ID
ID of the mirroring group to be configured.
The available groups were added previously.
Select a Local mirroring group ID to configure ports for the local mirroring group.