H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 139)

129
Item Description
Select membership
type
Set the member type of the port to be modified in the VLAN:
• Untagged—Configures the port to send the traffic of the VLAN after removing the
VLAN tag.
• Tagged—Configures the port to send the traffic of the VLAN without removing the
VLAN tag.
• Not a Member—Removes the port from the VLAN.
Select ports to be
modified and
assigned to this VLAN
Select the ports to be modified in the selected VLAN.
When you configure an access port as a tagged member of a VLAN, the link type of the
port is automatically changed into hybrid.
Modifying a port
1. Select Network > VLAN from the navigation tree.
2. Click Modify Port to enter the page for modifying ports.
Figure 129 Modifying ports
3. Modify the VLANs of a port as described in Table 43 .
4. Click Apply.
A progress dialog box appears.
5. Click Close on the progress dialog box when the dialog box prompts that the configuration
succeeds.