H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 77)

67
Table 18 Configuration items
Item Description
Create/Remove
Select the operation type:
• Create—Configure or change the super password.
• Remove—Remove the current super password.
Password Set the password for non-management level users to switch to the management level.
Confirm Password
Enter the same password again. Otherwise, the system will prompt that the two
passwords are not consistent when you apply the configuration.
Switching the user access level to the management
level
This function allows a user to switch from the current user level to the management level. To switch to the
management level, a user must provide the correct super password.
The switchover operation does not change the access level configured for the user. The access level
switchover of a user is only effective for the current login. When the user logs in to the Web interface
again, the access level of the user is still the original level.
To switch to the management level:
1. From the navigation tree, select Device > Users.
2. Click the Switch To Management tab.
3. Enter the correct super password.
4. Click Login.
Figure 60 Switching to the management level