H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 21)

11
Function menu Description User level
Interval
Configuration Set an interval for collecting traffic statistics
on interfaces.
Configure
Storm
Constrain Storm Constrain
Display and set the interval for collecting
storm constrain statistics.
Display, create, modify, and remove the
port traffic threshold.
Configure
RMON
Statistics
Display, create, modify, and clear RMON
statistics.
Configure
History
Display, create, modify, and clear RMON
history sampling information.
Configure
Alarm
View, create, modify, and clear alarm
entries.
Configure
Event
View, create, modify, and clear event
entries.
Configure
Log
Display log information about RMON
events.
Configure
Energy
Saving
Energy Saving
Display and configure the energy saving
settings of an interface.
Configure
SNMP
Setup
Display and refresh SNMP configuration
and statistics information.
Monitor
Configure SNMP. Configure
Community
Display SNMP community information. Monitor
Create, modify, and delete an SNMP
community.
Configure
Group
Display SNMP group information. Monitor
Create, modify, and delete an SNMP
group.
Configure
User
Display SNMP user information. Monitor
Create, modify, and delete an SNMP user. Configure
Trap
Display the status of the SNMP trap
function and information about target
hosts.
Monitor
Enable or disable the SNMP trap function,
or create, modify, and delete a target host.
Configure
View
Display SNMP view information. Monitor
Create, modify, and delete an SNMP view. Configure
Interface
Statistics
Interface Statistics
Display and clear the statistics information
of an interface.
Configure
Network VLAN
Select VLAN Select a VLAN range. Monitor
Create Create VLANs. Configure
Port Detail Display the VLAN-related details of a port. Monitor