H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 64)

54
Figure 48 Configuring the rate of GigabitEthernet 1/0/4
2. Batch configure the rate of GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet
1/0/3 as 100 Mbps:
a. On the Setup tab, select 100 from the Speed list.
b. On the chassis front panel, select 1, 2, and 3.
1, 2, and 3 represent ports GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and
GigabitEthernet 1/0/3.
c. Click Apply.