EXP Computer C4077-90960 User Manual
Page 83
N o t e
Refer to Figure 4-2. Each adjustment notch changes the physical position of
the tray by 0.5 mm (0.02 in). Moving the lever counter-clockwise moves the
tray inward and increases distance A. Moving the lever clockwise moves
the tray outward and decreases distance A.
Tray 2/3 Position Adjustment
4
If distance A is greater than distance B by more than 0.5 mm (0.02 in),
move the adjustment lever clockwise one notch.
5
If distance A is less than distance B by more than 0.5 mm (0.02 in), move
the adjustment lever counter-clockwise one notch.
6
After adjusting:
•
Re-install the tray.
•
Re-run the Paper Path Test.
•
Recheck the measurements.
•
Re-adjust as necessary.
Figure 4-2
4-8 Maintenance and Adjustments