Paper bins and blind cover – EXP Computer C4077-90960 User Manual
Page 225
Paper Bins and Blind Cover
The procedure for removing the paper bins and the blind cover is the same.
Each bin rests in its labeled slot.
1
Remove the paper bins and the blind cover from the top down.
2
Lift up on the outer edge of the bin (or blind cover) to clear the retaining
notch, and pull it forward out of the frame (Figure 6-86).
To Reinstall:
Replace the paper bins from the bottom up. Place the blind cover between
Bin 1 and the Face-Up Bin. Slide the bin into its designated slot and lower
it into its retaining notch.
Multi-Bin Mailbox/Mailbox with Stapler, Bin Removal
Figure 6-86
6-98 Removal and Replacement