EXP Computer C4077-90960 - Manual (Page 135)

Disk Drive
N o t e
When the disk drive is replaced, all fonts and
macros must be re-loaded.
1 The Disk Drive is mounted on the upper
front corner of the Formatter PCA under
MIO card No. 1 (if installed).
2 With the printer OFF and unplugged,
loosen (2) captive screws and remove the
Formatter Assembly. Remove MIO card
No. 1, if installed.
3 Place the Formatter Assembly face down
on a level surface. There are (2) small
latches and (2) large latches. Push the (2)
small latches through the holes to unlatch
the drive.
4 Flip the Formatter Assembly over,
unlatch the ribbon cable and remove the
drive.
6-8 Removal and Replacement