RLE LD5200 V.2.3 - Manual (Page 80)

80 LD5200 User Guide 800.518.1519
4 Web Interface
4.3.15 Alarm Management
Use this page to manage and reset current alarms, messages, and alarm history.
Figure 4.32 Alarm Management Page
Number_of_APDU_
Retries
The maximum number of times and APDU is retransmitted.
Send Test Alarms Click this button to test your alarm configuration. Press the submit
changes button before clicking this link, or all your BACnet
configuration data will be lost.
Clear Test Alarms Click this button to clear the test alarms once they have been sent
and correctly received.
Option Description
Table 4.13 Bacnet Options
Option Description
Silence Audible
Alarms
Click to silence the current audible alarm. This will not turn off the
audible alarm permanently - that option is available on the Leak
page.
Reset Leak Alarm Resets the current leak alarm and causes the LD5200 to recheck the
current cable conditions. This clears the alarm condition if the cable
registers that the leak threshold is within an accepted range.
Acknowledge
Preventative
Maintenance Alarm
The preventative maintenance alarm is configured on the Leak page.
Use this link to acknowledge the alarm once it is activated.
Clear Alarm History View the alarm history through the Historical Data link at the top of
the web interface. Click this button to clear the alarm history of all
previous alarms.
Acknowledge
Unsent Emails
Clears unsent emails so they aren’t sent to recipients. Events are still
logged in the historical data.
Acknowledge Snmp
Informs
Acknowledges SNMP Informs and stops Informs from being sent out
for the current alarm condition.
Table 4.14 Alarm Management Options