RLE LD5200 V.2.3 - Manual (Page 70)

70 LD5200 User Guide 800.518.1519
4 Web Interface
4.3.10 NTP
NTP, or Network Time Protocol, is used to synchronize clocks of computer systems. NTP
synchronizes the time of a computer or device (the LD5200) with another computer or
referenced time source. NTP maintains a high level or accuracy and reliability in time stamped
events.
Figure 4.27 NTP Configuration Page
Option Description
NTP Server The IP address or hostname of the NTP server with which your
LD5200 will synchronize. Public NTP servers include us.pool.ntp.org
and time.nist.gov
Default setting: blank
Update Interval Designate how often you’d like the LD5200 to access and
synchronize with the NTP server. Enter a 0 to disable this feature.
Default setting: 0 (disabled)
Select Time Zone Select the time zone in which this particular LD5200 resides.
Default setting: Western European (UTC + 0)
Daylight Savings
Time
Enable or disable Daylight Savings Time, and designate at which
time DST goes into effect in your time zone.
Default setting: Disabled
Table 4.9 NTP Configuration Options