RLE LD5200 V.2.3 - Manual (Page 27)

rletech.com LD5200 User Guide 27
2 Installation
2.9 Configure Security Settings
The LD5200 allows users to create a user name for web interface access and set two different
passwords for that user.
The Read Only password allows users to access the LD5200’s web interface and view the
conditions of the system, but does not allow users to make changes to the LD5200’s
configuration.
The Read/Write password provides users with expanded access. This password allows users to
view the conditions of the system and make changes to the LD5200’s configuration.
By default, the LD5200’s username is: ld5200 (case sensitive)
By default, no password is assigned.
To access the web interface, type ld5200 in the User Name field, leave the password field
blank, and press return.
Web interface passwords can only be configured through the web interface. Refer to Chapter
4, “Web” on page 59 for further information.
2.10 General Operation
The LD5200 features both an LCD and a web interface. The LCD is accessible on the front of
the device’s enclosure, and allows users to quickly access, acknowledge, and configure system
settings, alarms, alarm history and device operations. The web interface provides more in-
depth access to the LD5200, and allows users to accomplish all the same tasks as the LCD,
while addressing some robust, expanded functionality that cannot be utilized through the
LCD.
Both interfaces access the same information and data. If you make changes to the LD5200
through the LCD, the changes will show up on the web interface, and vice versa.
Refer to Chapter 3, “LCD Touch Screen Interface” on page 29 for detailed information
regarding the LCD. Refer to Chapter 4, “Web Interface” on page 47 for detailed information
regarding the web interface.