RLE RA1x2 User Manual
Ra1x2 quick start guide
RA1x2 Quick Start Guide
hank you for purchasing the Raptor RA1x2. This guide describes how
to install the RA1x2.
If you need further assistance, contact RLE Technologies on our
website at http://www.rletech.com/ (go to the Support Link) or by calling
970.484.6510, Option 2.
1
Installation
Electrical Connections
1
Connect the 24VAC/VDC to J1 pin 9 and pin 10.
2
Connect the alarm input (dry contact) to J1 pin 7 and pin 8.
T
Alarm Relay Output Wires
Input Wires
Relay 1
-
Common (COM)
J1 pin 5
Relay 1
-
Normally Open (NO)
J1 pin 4
Relay 1
-
Normally Closed (NC)
J1 pin 6
Relay 2
-
Common (COM)
J1 pin 2
Relay 2
-
Normally Open (NO)
J1 pin 1
Relay 2
-
Normally closed (NC)
J1 pin 3