RLE LD5200 V.2.3 - Manual (Page 33)

rletech.com LD5200 User Guide 33
3 LCD Touch Screen Interface
3.4 Status Button
The Status button allows you to view
current controller status information.
Most of these values can be adjusted
through the Setup button on the main
page of the LCD. The Status page is
intended for reference only, not
system adjustment.
Attribute Description
Alarm Status If the controller is in an alarm state, details regarding the alarm
are noted in this field. The field is also color coded to indicate
the type of alarm.
Cable Length The length of sensing cable connected to the controller, as
calculated by the LD5200
Cable Current The amount of current running on the sensing cable
Leg 1 Resistance The resistance of Leg 1 is displayed in Ohms.
Leg 2 Resistance The resistance of Leg 2 is displayed in Ohms.
Leak Alarm Delay The amount of time that passes between the time a leak is
detected and the annunciation of the leak alarm.
Contamination
Alarm Delay
The amount of time that passes between the time a
contamination is detected and the annunciation of that alarm.
Re-alarm
Countdown
The amount of time remaining until the active alarm is re-
annunciated.
Last Alarm Time A record of the last time the system detected an alarm
condition.
sysUpTime The amount of time that has passed since the system was last
reset or powered on.
Table 3.7 LCD Controller Status Information Fields
LCD - Controller Status