Measurement Computing ADAC-LVi - Manual (Page 195)

Chapter 2 CJ (Cold Junction) Config Library
ADAC LabVIEW VI 189
$'$& 6HW &- *OREDO FRQ¶W
Global CJ (BNBS:0) Global CJ is a numeric value that globally sets all CJ channels to
the specified CJ setting. The available options are:
0:BNBS TYPE B Thermocouple (NON CJ)
1:JNBS TYPE J Thermocouple (NON CJ)
2:KNBS TYPE K Thermocouple (NON CJ)
3:ENBS TYPE E Thermocouple (NON CJ)
4:TNBS TYPE T Thermocouple (NON CJ)
5:RNBS TYPE R Thermocouple (NON CJ)
6:SNBS TYPE S Thermocouple (NON CJ)
The default Global CJ is 0:BNBS
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.
ADAC Get CJ List
This VI function retrieves the current CJ settings in the ADAC driver. The CJ listing is
comprised of a channel number and CJ type. The CJ list may contain channel/CJ settings
that are not currently set in the channel listing itself. The CJ ID type setting in the array
can be obtained from the capabilities file.
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.