Measurement Computing ADAC-LVi - Manual (Page 106)

Chapter 2 Environment Config
ADAC LabVIEW VI 100
ADAC Release Env
This VI releases the ADAC-LVi environment. This VI must be called before the main VI
terminates to release the system resources allocated by the ADAC-LVi environment. This
VI releases the ADAC-LVi environment even if (error in) contains an error. This VI is
typically not required, see notes below.
Note: The ADAC-LVi is set to automatically loads the environment
when a call to AllocateDevice is initiated and released when
the last device handle in use is released. This behavior is
controlled by the AutoLoad=YES setting in the ADAC-
LVi.con file located in the main Windows directory.
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.
ADAC Set Env String
This VI sets ADAC-LVi user-defined environment description string.
Environment String Specifies the user define environment description string.
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.