Measurement Computing ADAC-LVi - Manual (Page 192)

Chapter 2 Range Config Library
ADAC LabVIEW VI 186
ADAC Get Data Range
This VI gets the hardware data voltage range of the device from the ADAC driver. See
the AL_SetDataRange.VI for the available options.
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
DATA RANGE DATA RANGE is a numeric value that represents the current hardware
voltage data range of the device.
The available options are:
0:-5_5 +/- 5V
1:0_10 + 0-10V
2:-10_10 +/- 10V
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.