Measurement Computing ADAC-LVi - Manual (Page 183)

Chapter 2 Panel Config Library
ADAC LabVIEW VI 177
6HW ([SDQVLRQ 3DQHOV FRQ¶W
Numeric Panel List Numeric array of Panel types. The Panel ID numbers are
defined in the devices capabilities file.
Examples:
Array
{0,0,1,2};
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.
ADAC Set Expansion Panel Gains
This VI function sets the board's input panel channel gain(s) for the specified device. The
available panel gains are typically fixed in hardware and are specified in the device
capabilities file.
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
PANEL GAIN LIST
Array Type Array Type is a numeric value that specifies the type of panel gain
list in use. The available options are:
0:STRING_LIST Character string list of panel gains
1:ARRAY_LIST Numeric array of panel gains