Measurement Computing ADAC-LVi - Manual (Page 191)

Chapter 2 Range Config Library
ADAC LabVIEW VI 185
$'$& *HW 'DWD 2IIVHW FRQ¶W
DATA OFFSET DATA OFFSET is a numeric value that represents the hardware data
offset configuration of the device. The available options are:
0:BIPOLAR Bipolardata +/-V
1:UNIPOLAR Unipolar data 0-V
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.
ADAC Set Data Range
This VI sets the hardware data voltage range of the device.
Device Handle (0) Device Handle is a numeric value that is used to identify the device
subsystem. The default Device Handle is 0.
DATA RANGE (-10/10:0) DATA RANGE is a numeric value that sets the hardware
voltage data range of the device. The available options are:
0:-5_5 +/- 5V
1:0_10 + 0-10V
2:-10_10 +/- 10V
The default DATA OFFSET is 2:-10_10
error in (no error) Error in describes error conditions occurring before this VI executes.
This cluster defaults to no error.
Device Handle out Device Handle out contains the value of Device Handle in.
error out Error out contains error information. If the error in cluster indicated an error,
the error out cluster contains the same information. Otherwise, error out describes the
error status of this VI.